Approval Engine

Workflows and Default Approval routing

At a high level, when users request access to resources, they initiate workflows that attempt to execute one or more EmpowerID Operations against those resources in a manner that is consistent with the workflow. For example, if a user requests membership in a Management Role, the workflow related to that request attempts to execute operations against both the user and against the Management Role to update the person’s role membership. Previously, if a user did not have the access needed for the workflow to execute those operations, approval tasks would be created and routed to each person within the organization with the RBAC delegations to approve the request (i.e., execute the operations in the workflow) and go into an idle state. These approval tasks would then appear as a task in each potential approver’s My Tasks Dashboard. Once approved, the workflow would resume and EmpowerID would fulfill the request. If rejected, the workflow would resume and exit.

Workflow Approval Routing

While the previous default approval routing is effective, EmpowerID has enhanced the process to give organizations more control over approvals. All workflows now have a new property called Never Send for Approval and most workflows have that property enabled out of the box.

The logic that occurs in the approval process in relation to the Never Send for Approval property on a given workflow is as follows:

• When Never Send for Approval is True (selected in the UI)
  When Never Send for Approval is set on a workflow (as shown in Figure 2), EmpowerID verifies whether the person executing the workflow has the RBAC access needed to perform the workflow’s operations. If the person has access, the workflow continues; if the person does not have access, EmpowerID notifies the person that they do not have access and the workflow exits. Approval routing never occurs. There are several benefits to removing approval routing in this way, including the following:

  • This significantly reduces the number of approval tasks generated by the system and removes actions from the approval process that should not be there in the first place.

  • The workflows and the operation base do not generate Business Process Tasks (Business Process is a workflow and all the operations in it are Business Process Tasks) when a person does not have the RBAC delegations to execute the workflow.

• When Never Send for Approval is False (not selected in the UI)
  If the setting is false, the workflow must be configured with a Business Request Type and it will always go for approval, even if the person has access to execute the workflow operations. The Business Request Type property allows workflows to be classified for the purpose of providing greater flexibility in approval routing and the grouping together of related access requests. Rather than having a default approval routing that simply routes unrelated approvals to all users with the delegations to approve requests, organizations can this property along with new Access Request and Approval Flow policies to group together related access requests into a single consolidated “approval bundle,“ specify to whom approval tasks should go, and how many approvals need to occur before fulfillment occurs.
  
  

  

Approval Flow Policies

When users shop for resources in the IT Shop, they put resource items for which they are eligible to receive in their shopping carts. When ready, they submit the items in their cart to the EmpowerID system. These cart submissions are known as “Business Requests.” Each Business Request can contain one or more resource items, depending on the number of items that was in a user’s cart when submitted. The Business Request, including all the items in that request, route for approval based on the configuration of Approval Flow policies. Approval Flow policies are user-defined policies that organizations can create to direct Business Requests through an approval process that can involve multiple levels of approval from numerous designated approvers before users receive the items in a Business Request, known as “fulfillment.” Organizations can craft Approval Flow polices that are as simple or as complex as their needs dictate. Approval Flow policies have a number of key components that can be configured to specify how this occurs.

These components include the following:

• Business Request Type – As mentioned above, Business Request Type is a workflow property used to group workflows by the type of business request they represent. An example of a Business Request Type is the IT Shop Business Request Type. This type represents anything that is published to the IT Shop, such as Application and Business Roles, Management Roles and Azure Licenses. Approval Flow policies can be configured to specify that requests of a certain Business Request Type must go through three levels of approval, for example, before fulfillment occurs.

• Approval Flow Steps – Approval Flow Steps are added to Approval Flow policies to specify how many approvals are required for fulfillment. Approval Flow policies can have as many Approval Flow Steps as needed. Each step is a sequential step that must be approved at that level to proceed to the next step. Each step can have its own approval flow, and steps can be configured for “step-level” fulfillment. This means that a step can run a workflow and perform some action based on the decision made for the step.

  • Item Level Approval – Each step can be configured to allow for Item Level approval. Item Level represents the individual items in a business request, such as requesting an Office 365 mailbox or an Application Role. With Item Level approval enabled for a step, the step approver can elect to make item-by-item approvals rather than being forced to approve or reject the entire request in toto.

  • Approver Resolver Rules – Approver Resolver rules specify to whom the Approval Flow Step needs to route for approval. These can be routed to various actors in EmpowerID to include the:

    • Initiator Manger – The request routes to the manager of the person initiating the request

    • Target Person Manager – If making a request for another person, the request routes to that person’s manager for approval

    • Resource Owner – Owner of the resource

    • RBAC Approver – Anyone with the RBAC delegations needed to approve the request

    • Static Approver – Approvers are specific users selected for the step

    • Fallback Approver – Can select someone to approve in the instance that a specified approver does not exist, such as would be the case if a Management Role was selected as a Static Approver and no one had that role

  • Items Types – Item Types are the individual resources that can be requested, such as membership in an Application Role.

  • Item Type Actions – Item Type Actions are in essence EmpowerID Operations and represent actions that can occur against an item (resource). Examples of Item Type Actions include Add Account To Group or Assign Azure License.

Approval Flow

While there are several pieces involved with how approvals flow in EmpowerID, the logic is straightforward. Approval flow begins at the Business Request level and then flows the items in the Business Request. If the Approval Flow Policies are configured to grant approval at the Business Request level, Item level approval is not necessary as all items in the request are approved.

Business Request Level

1. The Approval engine first looks at Business Request Type to see if the type is defined with any Approval Flow policies per Access Request policy. In other words, the engine looks to see if the target resource at the Business Request level is in a specified Access Request policy; if so, the engine then gets the Approval Flow policy specified for the Access Request policy.

2. If the Business Request Type is not defined as specified in Step 1 above nor defined for the Access Request policy of the target resource for the type, then the engine looks at the Business Request itself to see what is specified as the Approval Flow policy.

Item Level

1. The Approval engine first looks at the Item Type Action per the Access Request policy to see if the policy designates different Approval Flow policies for the resource of the item based on its Access Request policy.

2. If the there is not an Access Request policy defined in this way for the Item Type Action, it the looks at the Item Type Action itself to see if there is a specific Approval Flow Rule set for it. For example, an action like Add Account To Group can have a different Approval Flow Rule than the Remove Account From Group action.

3. Finally, if there is not a specific Approval Flow Rule set on the Item Type Action, the Approval engine falls back to the Approval Flow Policy for the item as specified on the item’s Access Request policy.

Figure 4 above depicts from a high level how approval flows work in EmpowerID. In the figure, a new Business Request is created to onboard an employee. As part of the onboarding request, several items are requested, a Business Role, an Application Role, and a Management Role. The Approval Policy for the Business Request is configured with two Approval Steps. The first step requires approval by the manager of the employee and the second step requires approval by the finance department. In each of the steps, Item Level approval is configured, meaning that the manager and the finance department can approve individual items and reject others. Items approved by all steps are then fulfilled by the system, while items rejected within any of the steps are not.

Access Request Policies

Access Request policies are used to control access to resources in EmpowerID and can be used to designate different Approval Flow policies for resources based on their Access Request policy. With this model, you create the Approval Flow policies first and then add them to the Access Request policy when you create it. EmpowerID includes a default out-of-the-box Access Request policy that meets most situations.  

Fulfillment

Fulfillment is the process by which EmpowerID fulfills approved Business Requests. Fulfillment is the completing action of “adding a user to an Application Role” or “provisioning a mailbox in Azure”, etc. When the items in a Business Request pass through all levels of approval, the items are then ready for fulfillment. Fulfillment is handled by the Business Request Item Fulfillment Job. This job claims items ready for fulfillment and does one of two things, depending on whether those items have Correlation IDs associated with them.

1. No Correlation ID – Sends items without Correlation IDs to the fulfillment workflow specified for the related Item Action Types. For example, if a user is to be added to a Management Role, the item would be fulfilled by the workflow specified for that action. These items are never sent back to the calling workflow operation for resumption. The calling workflow exits the process.

2. Correlation ID – Returns items with Correlation IDs back to the calling workflow operation where approval was required to proceed.

Figure 5 below visually depicts from a high level how fulfillment occurs based on the whether Correlation IDs exist for an executed workflow.

Notification Policies

As mentioned earlier, part of the approval process involves notifications. Approvers and initiators of requests , as well as all delegated users received notifications of these events. As part of the redesign of the approval process, EmpowerID has reconfigured how notification occurs, giving users the ability to tailor the amount and type of notifications they receive to their personal preferences.  How notifications now work in EmpowerID is as follows:

1. Each time a user submits a Business Request a Business Request Event is raised.

2. Business Request Events are submitted to the Business Request Notification Policy engine.

3. The Business Request Notification Policy engine determines if the event needs to be added to the Business Request Notification Inbox. To determine this, the engine first performs a granular scan of each person’s notification preferences, then falls back to the default system notifications if there are no personal notification preferences set.

4. Notifications are then sent to Business Request participants based on those notification settings.

Notification Policy Components

There are several components to Notification policies and how the Notification Policy engine delivers notifications. These include the following:

1. Business Request Events – There are four levels of Business Request Events where notifications can be raised.

   • Created – Occurs when a Business Request is created. This can be used to, for example, create a policy that sends an email notification to managers of users creating a Business  Request.

   • Open – This is used in Approval Flow Policies with more than one Approval Flow Step to notify progressive approvers that the item is ready for them to review once a previous step has been approved by the person delegated for that step. If the previous step is rejected, then this notification would not be sent out.

   • Approver Set – Raised when someone manually assigns an approver to a step.

   • Fulfillment Ready and Fulfillment Completed – These are only available at the item level. They are relative to a specific item that has been approved are is now ready to be fulfilled, which creates a notification at that level. Additional notifications occur when fulfillment completes, such as happens when a user is added to a group in response to a Business Request.

   • Completed – Completed can be used at the step level and the Business Request Level to send notifications that a particular step is completed and when the Business Request itself is completed.

2. Business Request Participant Type – Individuals related to a specific part of a business request. are fields in the BusinessRequestParticipantType table.

   • Initiator – Person requesting the resource

   • TargetPerson – Person receiving the resource assignments

   • InitiatorManager – Manager of the request initiator

   • TargetPersonManager – Manager of the person receiving the resource

   • Approver – Person who approves or rejects a step

   • Approver Manager – Manager of the person who approves or rejects a step

   • Potential Approver – Selected people who could approve or reject a step (delegated)

   • Commenter – Person who adds comments to a request

3. Levels

   • Business Request – Shopping cart submission

   • Business Request Item – Individual items submitted

   • Business Request Approval Step – The Business request is approved or rejected globally. The decision here if final.

   • Business Request Item Approval Step – Each item in the business request can be approved or rejected on a case-by-case basis.

4. Messages – Email message delivered by the notification engine to Business Request participants.